Arctic Freezer A13 X CO Compact Heatsink & Fan AMD AM4 Continuous Operation Dual Ball Bearing 150W TDP

£29.01 Inc Vat

In Stock

SKU: ACFRE00084A Categories: ,

Description

Arctic Freezer A13 X CO Compact Heatsink & Fan AMD AM4 Continuous Operation Dual Ball Bearing 150W TDP 6 Year Warranty

Compact AMD CPU Cooler for Continuous Operation

    Ready to cool your AMD CPU

    Small Footstep for Optimal Compatibility

    Pre-applied MX-2 Thermal Paste

    Longer Lifespan thanks to its Low Motor Temperature

    Offset Heat Pipes enable Optimal Heat Dissipation

    P-fan for Increased Performance

    Double Ball Bearing for Continuous Operation

    Direct Touch Heat Pipes

    More Cooling Capacity with Freezer A13 X CO

    More Efficient and Whisper Quiet

    Multilingual Manuals

Ready to cool your AMD CPU

  The ARCTIC Freezer A13 X CO is a compact CPU cooler with one 92mm fan. It benefits from an improved heatsink design and a reworked heat pipe layout. In conjunction with the fan, which is optimised for high static pressure, ARCTIC was been able to significantly improve the Freezer A13 X CO’s cooling performance. With the use of a double ball bearing it is designed for continuous operation and is therefore also suitable for 24/7 operations. It is supplied with pre-applied ARCTIC MX-2 thermal compound and has a simple assembly system.

Small Footstep for Optimal Compatibility

  The Freezer A13 X CO combines a compact advanced heat sink design with 3 direct touch heat pipes. In combination with the fan designed for static pressure, an optimal cooling performance is achieved despite the comparatively small dimensions. The Freezer A13 X CO has an installation height of only 137 mm and there are no limitations in RAM compatibility.

Pre-applied MX-2 Thermal Paste

  Pre-applied, high-performing MX-2 thermal paste ensures quick and clean assembly.

Longer Lifespan thanks to its Low Motor Temperature

  The Freezer A13 X CO uses a fan motor newly developed by ARCTIC. This runs less audibly and more efficiently, so that the temperature of the coils is 20 C lower than with conventional motors. This increases the lifespan of the fans considerably, allowing ARCTIC to grant a 6-year warranty period for the Freezer A13 X CO.

Offset Heat Pipes enable Optimal Heat Dissipation

  The direct touch heat pipes attached to the Freezer A13 X CO and an optimised design of the 44 cooling fins together ensure that the heat from the CPU can be ideally removed and released into the air.

P-fan for Increased Performance

    Inspired by the P-series, the Freezer A13 X CO’s fan benefits from all of the advantages of P-fans:

     – High static pressure for increased cooling performance

     – Broad RPM range

     – Lower power consumption

     – Less vibration

     – PWM for synchronous fan control

Double Ball Bearing for Continuous Operation

  The premium quality Japanese dual ball bearing allows continuous operation 24/7 without the slightest compromise in performance. Dust and high temperature are affecting this bearing a lot less than generic sleeve or one ball bearings and thus make it the perfect choice when reliability is essential.

Direct Touch Heat Pipes

  The Freezer A13 X CO uses direct touch heat pipes. This ensures that the heat to be dissipated is transferred directly to the heat pipes without an additional material layer, and transported into the heatsink via the pipes.

More Cooling Capacity with Freezer A13 X CO

  The ARCTIC Freezer A13 X CO sets new standards in cooling. Compared to its predecessor, a performance increase could be tested.

More Efficient and Whisper Quiet

  In addition to operating more quietly, even at maximum speed, the Freezer A13 X CO’s built-in fan motor is also much more efficient. The power consumption was reduced from 0.18 A to 0.07 A, which corresponds to an effective savings of 60 % in power consumption. ARCTIC engineers were also able to reduce the volume by 40 %, allowing the Freezer A13 X CO to run at a whisper-quiet 0.3 sone when at maximum speed.

Multilingual Manuals

  ARCTIC offers a regularly updated user manual in many languages conveniently at your fingertips anywhere and anytime. Put the QR code sticker in an easy-to-reach place and never again waste time searching for product instructions.

Specification

Type: Heatsink and Fan

AMD/Intel: AMD

Compatibility: AM4

TDP: 150W

Fan Connector(s): 4-pin

#Hide#LED Lighting: No

Colour: Black

LED Lighting: –

Material: Aluminium Fins

Copper Heatpipes

Weight: 443 g

Fan Dimensions: 1 x 92mm

Dimensions: (LxWxH) 86 x 109 x 137 mm

Fan Controller: PWM

Rotation Speed: 2000 RPM

Fan Bearing: Dual Ball Bearing

Noise level: 22.5 dBA

Power: 0.09 A

Additional Features: See Overview

Package Type: Retail

Package Weight: 0.5400 kg

Warranty: 6 Years

#Hide# AM4 Socket: Supports Socket AM4

Additional information

Brand

Cooling_type

sku

ACFRE00084A

GTIN

4895213702546

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.